Grinding Machine

GO TO ADMIN PANEL > ADD-ONS AND INSTALL VERTIFORO SIDEBAR TO SEE FORUMS AND SIDEBAR

gisreng

New Member
Vendor
#1
TWLY Series Impeller Feeder
Classical feeder for hammer mill in grain & oil processing plants, feedmills and food factories.
鈼?Suitable for feeding drive granular and powdery materials.
鈼?Variable frequency enabling continuous feeding rate adjustment.
鈼?Magnets for metal removing.
鈼?Sealing at shaft ends, long service life ensured.
鈼?Adjustable gap between baffle and feeding roller.
FAQ
Extruder--Output is decreased.
(1)Tapered pressure ring or wear ring are worn out;Replace the tapered pressure ring or wear ring.(2)Screw head is worn severely;Replace the screw head.
Pellet mill--Pellet mill is clogged frequently.
(1)Deflecting scraper is worn out and feed mash is unevenly distributed into the ring die.Replace with a new deflecting scraper(2)The press roller is worn out; Replace with a new press roller.(3) More than one press roller get stuck; Check the press roller (4) The installation position of deflecting scraper is incorrect.Reassemble the deflecting scraper(5)The moisture content of the feed is too high.Reduce the moisture content.
Grinder--A significant reduction in the productivity.
(1)The motor power is insufficient; Repair the motor;(2)The hammer is worn severely; Deflect the other end to use or replace new hammer.(3)The raw material is not fed evenly; Feed the material evenly.(4)The moisture content of feed is too high; Dry the material (5)Sieve mesh is not in accord with the requirement; Replace the sieve plate of the corresponding sieve mesh.(6) Auxiliary suction filter bag is clogged; Clean or replace the bag.(7)Aperture ratio of the sieve slice is low; Choose the sieve slice with high aperture ratio.Grinding Machine
website:http://www.famsun-cn.com/feed-machinery/grinding-machine/
 
Top